The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Breva 1100 1200 Sport Norge Griso St All Categories

Sort by Title

Sort by Price

Page 4 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Air Filter

SIA10421 Fits Breva 850, Breva 1100, Breva 1200, Norge ALL, 1200 Sport ALL, MGS-01

Dimensions:
128mm external diameter, x 112mm

Air filter, cylindrical paper cartridge type

See SIA10422 for a reusable K & N air filter

part in stock More than 5 in stock

AP8104211

£11.70

INC VAT

£9.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Air Filter

SIA09777 Fits V100 Mandello, V100 Stelvio

Standard air filter

part in stock 2 in stock

2B009776

£72.00

INC VAT

£60.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Air Temperature Sensor

ELA30330 Fits Breva ALL, 1200 Sport, Griso ALL, Norge ALL, Stelvio, Bellagio, Cali Vintage, Cali Aquila Nera, V7 Classic, Breva 750, V7 Cafe, Cali 1100 (1994-1997), Cali EV ALL, Cali Stone, Cali Jackal, V11 Sport ALL, 1100 Sport ALL, Daytona ALL, Centauro

Marelli air temperature sensor

Supplied with screws. Two required per engine

this part will be ordered for you Order now and we will post your order within 7 days.

30729330 GU30729330 30 72 93 30
3072 9330 3072.9330 30.72.93.30

£85.00

INC VAT

£70.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Alternator

ENA05431 Fits Cali 1400 ALL, 1200 Sport, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio 1200

Dimensions:
Approx 160mm front to back, pulley OD 54mm

Belt driven alternator

Replaces Guzzi ref. GU05712431

This part is available by special order, request a quote

886255 MG886255

£420.00

INC VAT

£350.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Alternator Belt

ENA05530 Fits Cali 1400 ALL, 1200 Sport, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio 1200

Alternator belt

part in stock 1 in stock

05702530 GU05702530 05 70 25 30
0570 2530 0570.2530 05.70.25.30

£19.80

INC VAT

£16.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Alternator Nut Spacer

ENA30201 Fits Bellagio, Breva ALL, V7 Cafe, V7 Classic, V7 Racer, Cali EV, Cali Aquila Nera, Cali Stone, Cali Jackal, Griso ALL, Norge ALL, Stelvio, 1200 Sport, Nevada 750 (1998-2009), V11 Sport, Mille GT, Cali 3, Cali 1100, Centauro, 1100 Sport ALL, Daytona, Strada 1000, 750X

Dimensions:
16mm ID x 25mm OD

Spacer for retaining nut for alternator rotor on models with Ducati type charging system

part in stock 2 in stock

307144201

£9.00

INC VAT

£7.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Aluminium Master Cylinder Cap PS12 Brembo

BRA14103 Fits S3, Convert, G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, V35 II, V50 3, V65 ALL, V75 (4 Valves Per Cylinder), 750 SP, 750 Targa, Strada 750, NTX 350, V35 II, V35 Florida, Cali EV, Cali Jackal, Nevada (1991 - 2003), Cali 1100 (Frame Nos KC12446 - KD12178), Cali Stone, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL, Quota 1100, Stelvio, Bellagio

Dimensions:
53mm OD

Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models

Make your Guzzi stand out from the crowd!

This part is available by special order, request a quote

10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Angle Valve Extender

WHA98001 Universal Part

Dimensions:
90 degree

Ninety degree angle extender for schrader tyre valves. Improves access to valve for tyre pressure checking

Suitable for 130/70 x 17, 140/70 x 17, 130/80 x 70, 120/90 x 17 tyres

part in stock 5 in stock

£5.50

INC VAT

£4.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Single Banjo Bolt

BRA41653 Universal Part

Dimensions:
M10 bolt with M6 bleed nipple

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
This part is due back in stock soon, call 01484 841395 to reserve yours
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£33.00

INC VAT

£27.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 4 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33